Counter-pressure Bottle Filler (Shadow Edition)

The counter pressure bottle filler is designed to be used primarily for hobby use of homebrewers.

• Enables filling bottles up to 32 cm high.
• For filling all commonly used glass and PET bottles of volumes 0,5 L, 0,7 L, 1 L, 1,5 L and with inner neck diameter between 16,5 and 21 mm.
• Prepared connections for 8mm (5/16) and 9,5 mm (3/8) hoses.
• Adjustment for required bottle hight done by adjusting position of lower or upper console.
• Pushing force can be adjusted in several steps.
• LED module for illuminating the bottle.

Assembly of counter pressure bottle filler contains:

• Stainless body of counter pressure bottle filler with 8mm (5/16) and 9,5 mm (3/8) hose connectors
• Steel base with central tube and operating lever
• Plastic 3D printed components forming the overall assembly structure
• All necessary bolts and nuts
• LED module 12V (DC), 2W, with connector 5,5/2,1 mm - power adapter not included (can be ordered separately)
• Overflow bottle holder
• Multifuntional holders of hoses, Allen keys and cable
• Clamp for stabilization
• Drop tray

IMPORTANT:

• Stabilizing the stand requires bolting it down to a stable base. Alternatively, you can use the attached clamp for a quick fix.
• Delivered disassembled. Upon assembly, use only adequate tightening power. Do not use electric power tools. 
• For the first use, I recommend setting the lower push force and only if necessary to increase the strength. Especially for filling PET bottles (larger neck diameter).
• Before removing the filled bottle, always check the closure of the inflows of beer and CO2 and make sure the pressure is released using the side knob of the valve!
• Do not exceed filling pressure of 1 bar.
• Not for commercial use.