Stand for Counter-pressure Filler (Shadow Edition)

=======================

 THIS VARIANT DOES NOT INCLUDE STAINLESS BOTTLE FILLER 

=======================

Suitable if you already have the stainless bottle filler. Before ordering, make sure your filler is of the same type and meets the limit dimensions according to image below!

Stand for a counter pressure bottle filler is designed to be used primarily for hobby use of homebrewers.

• Enables filling bottles up to 32 cm high.
• For filling all commonly used glass and PET bottles of volumes 0,5 L, 0,7 L, 1 L, 1,5 L and with inner neck diameter between 16,5 and 21 mm.
• Adjustment for required bottle hight done by adjusting position of lower or upper console.
• Pushing force can be adjusted in several steps.
• LED module for illuminating the bottle.

Assembly of stand for counter pressure filler includes:

• Stainless body of counter pressure bottle filler with 8mm (5/16) and 9,5 mm (3/8) hose connectors
• Steel base with central tube and operating lever
• Plastic 3D printed components forming the overall assembly structure
• All necessary bolts and nuts
• LED module 12V (DC), 2W, with connector 5,5/2,1 mm - power adapter not included (can be ordered separately)
• Overflow bottle holder
• Multifuntional holders of hoses, Allen keys and cable
• Clamp for stabilization
• Drop tray

IMPORTANT:

• Stabilizing the stand requires bolting it down to a stable base. Alternatively, you can use the attached clamp for a quick fix.
• Delivered disassembled. Upon assembly, use only adequate tightening power. Do not use electric power tools. 
• For the first use, I recommend setting the lower push force and only if necessary to increase the strength. Especially for filling PET bottles (larger neck diameter).
• Before removing the filled bottle, always check the closure of the inflows of beer and CO2 and make sure the pressure is released using the side knob of the valve!
• Do not exceed filling pressure of 1 bar.
• Not for commercial use.

Limit filler dimensions that can be fitted to used filler bushing.

Please ensure your filler is of the same type as shown below and meets the limit dimensions given in the table.
Please note that the overflow outlet must be perpendicular to the filler axis.

If your filler doesn't meet these requirements compatibility with the filler bushing cannot be guaranteed!